« Acrylic transilluminator frames :: Contents :: Additional hardware for DSLR camera mounting »

Hardware¶

To make assembly steps easier, the hardware is broken up into 6 bags (Hardware Bags 1-6).

_images/bags_1_2_3.png

_images/bags_4_5_6.png

Bag 1 - Base panel¶

Qty	Description	Screw reference [1]
7	6-32, 3/8” long screws	Enclosure screws
4	8-32, 1/2” long screws	Insert frame screws
7	Right-angle brackets
4	Rubber feet

Bag 2 - Door panel¶

Qty	Description	Screw reference
1	6-32, 3/8” long screws	Enclosure screws
1	8-32, 5/16” long screws	Magnet plate screw
2	8-32, 1/2” long screws	Door Handle
8	10-32, 1/2” long screws	Hinge screws
1	Handle
2	Hinges
1	Magnet latch plate
1	Right-angle brackets

Bag 3 - Right panel¶

Qty	Description	Screw reference
2	6-32, 3/8” long screws	Enclosure screws
2	6-32, 5/16” long screws	Magnetic latch screws
1	Magnet latch
1	Cable grommet
2	Right-angle brackets

Bag 4 - Left and Back panels¶

Qty	Description	Screw reference
9	6-32, 3/8” long screws	Enclosure screws
9	Right-angle brackets

Bag 5 - Top panel¶

Qty	Description	Screw reference
4	6-32, 3/8” long thumbscrew	Filter standoff thumbscrews
4	6-32, 1/2” long male-female standoffs

Bag 6 - Enclosure Assembly¶

Qty	Description	Screw reference
19	6-32, 3/8” long screws	Enclosure screws

Footnotes

[1]	In the assembly instructions, the screws are referred to by their use in that assembly step, rather than thread size and length. For example an enclosure screw instead of 6-32, 3/8” long screw.

« Acrylic transilluminator frames :: Contents :: Additional hardware for DSLR camera mounting »