Colorimeter User Manual

Kit Contents

«  Introduction   ::   Contents   ::   Electronics Parts List  »

Kit Contents

Each Educational Colorimeter Kit contains the electronics boards, hardware and parts listed below. The kit parts are described in more detail on the next several pages. All of the kit parts are shipped in a 1.6 L storage container (clear or blue options). After assembly, the colorimeter fits back into the container for safe storage between uses. Note that the Arduino Uno is not listed as a kit component but is required. The Arduino Uno can be purchased pre-programmed with the kit.

_images/kit_contents_combined.JPG

Parts List

Colorimeter LED board, sensor board and shield for the Arduino

_images/image_05.JPG

Set of 6 cuvettes with caps (3 macro and 3 semi-macro)

_images/image_06.JPG

11 black laser cut acrylic parts and a clear laser cut engraved acrylic cover

_images/image_07.JPG

3 bags of Hardware, ribbon cable for connecting Arduino to the colorimeter and a Philips mini screwdriver

_images/image_08.JPG

«  Introduction   ::   Contents   ::   Electronics Parts List  »